When you purchase a ring from Ben Bridge Jeweler we are happy to size it for you the first time at no charge. If you are not sure of the size needed we recommend that you have your finger measured ahead of time, but be aware that depending on the design on the ring and the width of the band there can be some variables as to what size you will need for that particular ring. 

Most Ben Bridge women's rings are stocked in a sizes 6 ½ to 7 and men's are stocked in sizes 10 to 10 ½ and can be sized up or down 2 sizes. Please allow three to five additional business days to your delivery date to accommodate time for sizing your ring. Please note: Some channel set diamonds rings or other styles of designs that will not tolerate sizing must be special ordered in your size. Custom orders for specific sizes may take up to 12 weeks. Also, some of our manufacturers require an additional surcharge for special orders. You will be contacted before your order is processed if there is an additional fee for sizing or a need to special order a custom size.

Ladies rings are usually in stock in a size 6- 6 1/2.
Men's rings are in stock in a size 10.

Please e-mail us with any special sizing concerns you may have. info@benbridge.com

Ring Sizing Guide:

In order to print the ring sizer above, be sure that your printer is set to 100%. Make sure that you have not reduced the print size in your printer 'page setup' area. You can verify that the sizer printed correctly by measuring it with a ruler; it should measure from A to B: 3 1/2 inches long.

Once you have printed the sizer, follow these directions to find your ring size:

• Cut out the ring sizer
• Cut a slit for Slot "A"
• With the numbers facing out, wrap the sizer around the finger on where the ring will be worn.
• Pull the pointed end Tab "B" through Slot "A" until the sizer is very snug.
• Measure your knuckle the same way following the previous steps.
• The larger of the two numbers aligned with Slot "B" is your ring size.
• If the measure lands between two numbers your size is a half size Ex: Between 5 and 6 ring size: 5.5. If half sizes are not available, order the next largest size.